:	Mar 28, 2007

.

Remove the front seat cushion front access cover.   Release the 4 clips.

.

: Note of the routing of the wiring harnesses. :   Raise the seat base for access. Remove the driver seat module.   Remove the 2 Torx screws.   Release the harness clip.   Disconnect the 5 electrical connectors.

.

: Make sure that the wiring harnesses are correctly routed. Install the driver seat module.   Connect the electrical connectors.   Attach the wiring harness clip.   Install and tighten the Torx screws.

.

Install the access cover.   Secure in the 4 clips.

.

If a new moduule has been installed, carry out initialization.   Using each adjustment switch in turn, move the seat fully in all directions.